Meets the requirements of ASTM D 2178, Type IV
Excellent Porosity:Easy to handle, lays flat, minimizes workmanship related problems such as fishmouths, wrinkles and ridges. Allows the product to readily accept hot asphalt and disperses it throughout the entire felt, to stabilize asphalt after cooling.
Asphalt Impregnated, Fiber Glass Reinforcement Mat:Offers consistent tensile strength and tear resistance. Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic ply sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Laying Lines:Before the product is wound into rolls, it is imprinted with laying lines on the top surface so the roofing mechanic can install the felt with the proper exposure and provide the correct number of plies.
Surfacing:Liquid parting agent eliminates sticking when the felt is unrolled.
When it comes to design, we've got the tools to get you from the desk to the roof. Here you will find all of the BUR specifications, 3-part specs, details and installation guides. If you have any questions when it comes to installation, please contact our Specifier Services Group for design and your local technical representative for the field.
| PENETRATION, EQUIPMENT SUPPORT AND PROTECTION | CAD | |
| BIT-16 Roof Penetration Pan | DWG | |
| BIT-17 Lighting Rod on Roof Surface | DWG | |
| BIT-PT-01 Bituminous Light Support | DWG | |
| BIT-PT-02 Bituminous Medium Support | DWG | |
| BIT-PT-03 Bituminous Heavy Support | DWG | |
| BIT-PT-04 DynaTred Traffic Pads with Pavers | DWG | |
| BIT-PT-05 DynaTred Traffic Pads | DWG |
| WALL FLASHING | CAD | |
| BIT- 1 (LB) Base Flashing for Load Brng Wall with Counterflashing | DWG | |
| BIT-2 (WL) Base Flashing for Wall less than 24 inches | DWG | |
| BIT-3 (WH) Base Flashing for Wall more than 24 inched with Coping | DWG | |
| BIT-3 (WL) Base Flashing for Wall less than 24 inches with Coping | DWG | |
| BIT-6 (TH) Base Flashing for Wall more than 24 inches with Coping | DWG | |
| BIT-6 (TL) Base Flashing for Wall less than 24 inches with Coping | DWG | |
| BIT-15 (E) EPDM Wall Covering with BUR Base Flashing | DWG | |
| BIT-15 (E) Alt-EPDM Wall Covering with BUR Base Flashing | DWG | |
| BIT-15 (P) PVC Wall Covering with BUR Base Flashing | DWG | |
| BIT-15 (T) TPO Wall Covering with BUR Base Flashing | DWG |
| WALL FLASHING | CAD | |
| DFE-1 (LB) Masonry Wall with Counter Flashing | DWG | |
| DFE-2 (LB) TWO PLY BASE FLASHING FOR LB MASONRY WALL COUNTER FLASHING | DWG | |
| DFE-2 (PT) PERMA TITE COPING | DWG | |
| DFE-2 BASE FLASHING WITH SURFACE MOUNTED COUNTER FLASHING | DWG | |
| DFE-3 (WH) Wood Wall > 24" with Coping | DWG | |
| DFE-3 (WL) Wood Wall < 24" with Coping | DWG | |
| DFE-6 (TH) Masonry Wall > 24" with Coping | DWG | |
| DFE-6 (TL) Masonry Wall < 24" with Coping | DWG | |
| DFE-15 (E) EPDM Wall Covering with Bituminous Base Flashing | DWG | |
| DFE-15 (P) PVC Wall Covering with BIT Base Flashing | DWG | |
| DFE-15 (T) TPO Wall Covering with Bituminous Base Flashing | DWG | |
| DFE-15 (T-ALT) TPO Wall Covering with Bituminous Base Flashing (Alternate) | DWG | |
| DFE-20 (WL) Gypsum Wall on Metal Studs < 24" w/Coping | DWG | |
| DFE-20 (WH) Gypsum Wall on Metal Studs > 24" w/Coping | DWG | |
| DFE-24 Base Flashing for Venting Lightweight Concrete | DWG |
| VAPOR BARRIER SA DETAILS | CAD | BIM | |
| VB-1 (ALT) JM Vapor Barrier SA - Wall Base Detail - Alt | DWG | - | |
| VB-1 JM Vapor Barrier SA - Wall Base Detail | DWG | - | |
| VB-2 JM Vapor Barrier SA - Pipe Penetration Detail | DWG | - | |
| VB-3 JM Vapor Barrier SA - Drain Detail | DWG | - | |
| VB-4 JM Vapor Barrier SA - Detail at Field Laps | DWG | - | |
| VB-5 JM Vapor Barrier SA - Outside Curb Detail | DWG | - | |
| VB-6 JM Vapor Barrier SA - Inside Curb Detail | DWG | - |
| VAPOR BARRIER SAR DETAILS | CAD | BIM | |
| VB-1 (ALT) JM Vapor Barrier SAR - Wall Base | DWG | - | |
| VB-1 JMVapor Barrier SAR - Wall Base | DWG | - | |
| VB-2 JMVapor Barrier SAR - Pipe Penetration | DWG | - | |
| VB-3 JMVapor Barrier SAR - Drain | DWG | - | |
| VB-4 JMVapor Barrier SAR - Field Laps | DWG | - | |
| VB-5 JMVapor Barrier SAR - Outside Curb | DWG | - | |
| VB-6 JMVapor Barrier SAR - Inside Curb | DWG | - |
2x4 Ft. Roof 鶹ֱapp Fastener Placement
4x4 Ft. Roof 鶹ֱapp Fastener Placement
4x8 Ft. Roof 鶹ֱapp Fastener Placement
BM-12 Mechanically Fastened Base Sheet (12" o.c.)
BM-12,12,12 Mechanically Fastened Base Sheet (12", 12", 12" o.c.)
BM-18 Mechanically Fastened Base Sheet (18" o.c.)
BM-6 Mechanically Fastened Base Sheet (6" o.c.)
BM-7,7,7 Mechanically Fastened Base Sheet (7", 7", 7" o.c.)
BM-7,9,9 Mechanically Fastened Base Sheet (7", 9", 9" o.c.)
BM-75,75,75 Mechanically Fastened Base Sheet (7.5", 7.5", 7.5" o.c.)
BM-9,12,12 Mechanically Fastened Base Sheet (9", 12", 12" o.c.)
BM-9,18,18 Mechanically Fastened Base Sheet (9", 18", 18" o.c.)
BM-9,9,9 Mechanically Fastened Base Sheet (9", 9", 9" o.c.)
FA-16 Fully Adhered Cover (16-24-32)
FA-8 Fully Adhered Cover (8-16-32)
CBUA-12-6-4 Cover Board Urethane Adhesive Fastening
ICBUA-8-4-4 鶹ֱapp and Cover Board Urethane Adhesive Fastening
ICBUA-12-6-4 鶹ֱapp and Cover Board Urethane Adhesive Fastening
INUA-12-6-4 鶹ֱapp Urethane Adhesive Fastening
BM-9,9,9-TS Tape and Staple Attached Base Sheet (9", 9", 9" o.c.)
BM-9,9,9,9-TS Tape and Staple Attached Base Sheet (9", 9", 9", 9" o.c.)
*Please be sure to download the file before selecting your assembly.*
3 PLY BUR BONDED TO INSULATION ASSEMBLY PLATE
3 PLY BUR INCLUDING NAILED BASE SHEET ASSEMBLY PLATE
4 PLY BUR BONDED TO INSULATION ASSEMBLY PLATE
4 PLY BUR INCLUDING NAILED BASE SHEET ASSEMBLY PLATE
JM BUR Installation Application Guide
JM Vapor Barrier SA Installation Guide
PermaFlash® Bituminous Flashing System Detail Instructions
PermaFlash® Bituminous Flashing System Penetration Flashing
BUR Membrane Selector Guide -Español
Adhesives and Cements Selector Guide
鶹ֱapp and Cover Board Selector Guide
鶹ֱapp and Cover Board Selector Guide -Español
The Original Roofing Company (TORC) won a new build project in southwest Las Vegas from general contractor Martin-Harris Construction for a 200,000 square foot mixed use office and warehouse structure in an area with industrial. buildings, car dealerships and residential housing.
This job's unique location on top of Pikes Peak gives testament to JM BUR system's ability to weather the most intense of climates. Discover the products used and the excellent craftsmanship of Superior Roofing.
This was an 875 square project that required a reflective roof system to meet an energy star rating. The beauty of an energy efficient or solar reflective roof is BTU or British thermal unit consumption is diminished. This in turn saves building owners, and tenants alike money on energy bills.
Fitting of its “Inland Empire” location, Perris Logistics Center is a huge structure, with a roof of over 1.2 million square feet. This very warm and often windy Southern California area requires a building with high thermal efficiency, to protect the valuable products and high tech equipment inside as well as keep energy costs down. The center needed a “cool” roof that was reliable in the wind and elements.
Schmidt Brewery is the largest redevelopment project in St. Paul, MN history, coming in at a total cost of over $120 million. The result is Schmidt Artist Lofts, which brings 260 total units (247 apartments, 13 townhomes) within reach of St. Paul painters, writers, web designers and performers.
鶹ֱapp offersone of the most comprehensive portfolios of commerciallow-slope roofing solutions. We have a long standing dedication toproviding solution-based systems for building owners.
Here you will find quick links and cheat sheets to 鶹ֱapp roofing systems code approvals and ratings.
Guarantees and Roof Maintenance
Support services can include: conceptual product information, building science, wind uplift data, national and local code understanding, FM Global® and UL® regulations, fastening patterns and sheet layouts, installation guidelines and standard details.
Re-roofing mechanically attached or ballasted insulated single-ply systems now have the potential for recycling versus contributing to a landfill.
Your resource for all JM documents in one place.
The Submittal Wizard is a tool to help you pull together the necessary documents for your submittal package.
